China (Mainland)
lubricant additive Antifoam Agent 1#
- Min.Order: 2 Metric Ton
- Payment Terms: L/C,D/P,T/T,
- Product Details
Keywords
- lubricant additive
- Lubricant Antifoam Agent 1#
- Engine Oil Additive Package
Quick Details
- ProName: lubricant additive Antifoam Agent 1#
- Application: lubricant additive
- Port: Dalian
- ProductionCapacity: Metric Ton/Day
- Purity:
- LimitNum: 2 Metric Ton
Superiority
Lubricant Antifoam Agent 1#
（1）Introduction And Application
·This product has excellent performance with various additive packages, small influence on the air release of oil, good oil solubility and convenient use. It is added by spray at 60℃-70℃.
·This product is suitable for all kinds of lubricating oil as defoamer, especially for antiwear hydraulic oil and oil products that require air release value.
（2）Dosage Reference
The adding amount of this product is 10-200ppm.
（3）Quality Index
|
Item |
Quality Index |
Test Method |
|
Appearance |
Transparent Liquid |
Visual |
|
Mechanical Impurities，%（m/m） |
≤0.02 |
GB/T511 |
|
Density(20℃) ,Kg/ m 3 |
700-800 |
GB/T2540 |
|
Antifoaming(24℃),500SN |
100/0 |
GB/T12579 |
|
Deflation (500SN) min |
12 |
SH/T0308 |
（4）Storage
According to the requirements of SH/T0164,the maximum temperature should not exceed 75℃ for the storage,handling of the product and preparation of oil;for long-term storage.the maximum temperature should not exceed 45℃.
The product is non-flammanle,non-explosice and non-corrosive.No special preventation measure is required during safety,environmental protection and use ,it’s equal to general petroleum products.
（5）Packing
Net Weight：160Kg/Iron Drum，20kg/Iron Drum.
Details
Multifunction Engine Oil Additive Package T3160
（1）Introduction And Application
·This product is an additive package for the modulation of high grade oil.
·Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine.
·Test data to meet the performance requirements of grade API CI-4/SL in Daqing class II/III base oil. The test was carried out in according to the rules of the API base oil exchange.
（2）Dosage Reference
|
Quality Level |
Base Oil Type |
Viscosity Grade |
Additive Dose（m %） |
|
CI-4/SL |
API Ⅱ/Ⅲ |
15W40/10W40/10W30 |
13.0 |
|
CH-4/SL |
API Ⅰ Ⅱ |
15W40/10W40/10W30 |
11.5 |
|
CH-4/SJ |
API Ⅰ Ⅱ |
15W40/10W40/10W30 |
11.5 |
|
CF-4/SL |
API Ⅰ Ⅱ |
15W40/10W40/10W30 |
7.5 |
|
CF-4/SJ |
API Ⅰ Ⅱ |
15W40/10W40/10W30 |
6.0 |
（3）Quality Index
|
Item |
Quality Index |
Test Method |
|
Density（20℃），kg/ m3 |
Report |
GB/T1884 |
|
Flash Point(Open)，℃ |
≥170 |
GB/T3536 |
|
Kinemaitc Viscosity（100℃），mm2/s |
≥100.0 |
GB/T265 |
|
TBN，mgKOH/g |
≥70.0 |
SH/T0251 |
|
P，%（m/m） |
≥0.70 |
SH/T0296 |
|
N，%（m/m） |
≥0.50 |
SH/T0224 |
|
Zn，%（m/m） |
≥0.90 |
SH/T0226 |
|
Ca，%（m/m） |
≥2.30 |
GB/T0297 |
（4）Storage
According to the requirements of SH/T0164,the maximum temperature should not exceed 75℃ for the storage,handling of the product and preparation of oil;for long-term storage.the maximum temperature should not exceed 45℃.
The product is non-flammanle,non-explosice and non-corrosive.No special preventation measure is required during safety,environmental protection and use ,it’s equal to general petroleum products.
（5）Packing
Net Weight：190 Kg/Iron Drum.
CONTACT
NAME:Belinda